3pt Hitch rubbing on tire
pkinneb
Join Date: Feb 2004 Posts: 5 MN |
2004-11-14 100336
I am looking for information on how to adjust me three point hitch. I took delivery of a new JD4110 two weeks ago and today I noticed the rear box blade was leaning to the right and rubbing the tire. How do I adjust to stop this. FYI I have the i match system.
Reply to | Quote Reply | Add Photo
3pt Hitch rubbing on tire
Billy
Join Date: Oct 1999 Posts: 975 Southeast Oklahoma Pics |
2004-11-14 100337
Adjust your 3pt anti-sway so the 3pt hitch is centered. ....
Reply to | Quote Reply | Add Photo
3pt Hitch rubbing on tire
pkinneb
Join Date: Feb 2004 Posts: 5 MN |
2004-11-15 100366
Is that the gold turnbuckles on the bottom? Bare with me I'm new at this. Thanks ....
Reply to | Quote Reply | Add Photo
3pt Hitch rubbing on tire
AV8R
Join Date: Oct 2003 Posts: 882 North Central Wisconsin Pics |
2004-11-15 100372
Yes, adjust them to center everything up.
Don't worry, we've all been there. The only stupid question is the unasked one. ....
Reply to | Quote Reply | Add Photo
3pt Hitch rubbing on tire
DennoAce
Join Date: Jan 2004 Posts: 105 usa |
2004-11-24 100938
I agree of course no such thing as a stupid question, but my silly question is why you haven't read the manual that came with the tractor? :) ....
Reply to | Quote Reply | Add Photo
3pt Hitch rubbing on tire
pkinneb
Join Date: Feb 2004 Posts: 5 MN |
2004-11-24 100966
I have. However if you've looked at the Deere 4110 manual it has 5 bullet points on the subject and when I adjust the turn buckles as they suggest although its now not rubbing it still comes within a 1/4" of the tire and seems to have an awful lot of swing left to right. ....
Reply to | Quote Reply | Add Photo
3pt Hitch rubbing on tire
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2004-11-24 100985
Tighten both turn-buckles equally until the side-to-side sway is about 1/2 inch and the implement is centered between the tires. Don't overtighten... it needs a tiny bit of slop to raise and lower without binding.
Shame on your dealer for not showing you what to do here. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This